Senior QAQC Inspector - Advance NDT
Job Fit Check
Base Career helps you apply smarter for this job.
Key skills for this role
About the Role
Airswift is seeking a Senior QAQC Inspector with advanced NDT expertise for a major Oil & Gas company in Qatar. The role involves interpreting product/process suitability, performing advanced NDT techniques (PAUT/TOFD), reviewing contractor inspection outputs, and ensuring weld quality.
Key Skills for This Role
Responsibilities
- Interpret suitability of products and processes against designated specification requirements
- Perform advanced NDT techniques (PAUT/TOFD) and accurate detection, characterization
- Review and technically assess contractor issued NDT reports, interpretation records, images, and supporting inspection data
- Review and verify NDT procedures, technique sheets, personnel certifications, calibration records, equipment validity
- Ensure full traceability between weld maps, line/component identification, NDT reports, repair history, and final inspection status
- Interpret advance NDT data and evaluate indications against applicable acceptance criteria
- Prepare accurate inspection reports with supporting data/images
- Engage with contractors and third party organizations professionally
- Monitor quality of works in progress at site and at EPC Contractor fabrication workshop
- Prepare daily report summarizing salient inspection points and quality concerns
Requirements
- Bachelor of Engineering Mechanical / Metallurgy or Equivalent
- NDT certificate in ASNT/PCN Level III for methods in UT, RT, PAUT and TOFD, as minimum
- NDT certificate in ASNT/PCN Level II for methods MT and PT, as minimum
- CSWIP 3.1 certification and NDT Certificate in ECT, preferred
- Minimum 10 years of working experience as NDE personnel for Oil & Gas projects
- Demonstrated minimum 4 6 years of hands on experience in advance NDT (PAUT/TOFD) post certification
- Practical experience in interpretation and acceptance evaluation of weld inspection results against ASME Section V, ASME B31.3, ASME VIII, API 1104, API 5L
- Demonstrated understanding of welding processes, weld joint configurations, and common discontinuities
- Experience in tube inspection (ECT, IRIS, ACFM), corrosion mapping and inspection of TKY weld joints
- Familiar with ISO 9001 quality assurance principles and practices
Full Job Posting
Vacancy Overview
- Airswift is an international workforce solutions provider within the energy, process, and infrastructure industries.
- Airswift is seeking for Senior QAQC Inspector to work in Qatar with a major Oil & Gas Company.
- To interpret the suitability of products and processes against the designated specification requirements at scheduled and ad hoc intervals.
- The role is primarily responsible for reporting using advanced NDT techniques, accurate detection, characterization, and supporting safe and reliable project execution.
- Responsible for advanced NDT technical review, verification of inspection technique suitability, independent assessment of contractor inspection outputs, and support to weld quality decisions during project execution.
Qualifications Requirement
- Bachelor of Engineering Mechanical / Metallurgy or Equivalent
- NDT certificate in ASNT/PCN Level III for methods in UT, RT, PAUT and TOFD, as minimum.
- NDT certificate in ASNT/PCN Level II for methods MT and PT, as minimum
- CSWIP 3.1 certification and NDT Certificate in ECT, preferred
- Minimum 10 years of working experience as NDE personnel for Oil & Gas projects, preferably in LNG (greenfield, brownfield, shutdowns, and live plant environments).
- Demonstrated minimum 4 6 years of hands on experience in advance NDT (PAUT/TOFD) post certification and NDT data interpretation, procedure review, scan plan assessment, and technical validation of contractor inspection outputs.
- Practical experience in interpretation and acceptance evaluation of weld inspection results against ASME Section V, ASME B31.3, ASME VIII, API 1104, API 5L, project specifications, and approved inspection procedures.
- Demonstrated understanding of welding processes, weld joint configurations, weld repair scenarios, heat affected zone considerations, common fabrication and service induced discontinuities, and the impact of welding variables on NDT technique selection and interpretation.
- Demonstrated ability to assess inspection limitations arising from geometry, restricted access, material condition, and weld profile, coating, cladding, or in service constraints, and recommend technically suitable inspection approaches.
- Extensive experience with reviewing/interpretation of PAUT/TOFD, RT Film and witnessing of MT and PT methods.
- Experience in tube inspection (ECT, IRIS, ACFM), corrosion mapping and inspection of TKY weld joints.
- Understanding of common weld defects and discontinuities, sour service, calibration techniques and scan plan development.
Key Responsibilities
- Engage with external Contractors to perform PAUT/TOFD and advance NDT techniques and perform defect sizing, characterization.
- Review and technically assess contractor issued NDT reports, interpretation records, images, and supporting inspection data to confirm adequacy, traceability, and compliance prior to acceptance.
- Review and verify NDT procedures, technique sheets, personnel certifications, calibration records, equipment validity, and qualification records prior to commencement of inspection activities.
- Ensure full traceability between weld maps, line/component identification, NDT reports, repair history, final inspection status, and supporting quality records.
- Interpret advance NDT data and evaluate indications against the applicable acceptance criteria (ASME, API, Project specs.) and prepare accurate inspection reports with supporting data/images.
- Engaging contractors and applicable third party organizations with a professional approach and maintain a good working level relationship
- Review contractors documented quality deliverables in accordance with the requirements and expectations of COMPANY and provide clear, concise output to the applicable quality focal point.
- Evaluate the suitability of products and processes at key stages against the prescribed specification requirements and is effectively implemented.
- Ensure NDE traceability of inspected welds and components.
- Continuously monitor the quality of works in progress at site and at the EPC Contractor fabrication workshop against the applicable NDT Procedure and COMPANY technical specification.
- Verify NDT calibration blocks, reference standards, and equipment validity.
- Ensure that the latest revision of project quality documentation is available, and that records of Product and process conformance are maintained in accordance with the document and record control requirements.
Apply for this job in 1 click
Skip the repetitive application forms
Install the Base Career Chrome Extension and autofill job applications across major job boards with your profile.
Trusted by over 500,000 job seekers on Base Career
More from this employer
More jobs at Airswift
Intermediate Contracts Advisor
Calgary, CAN
Airswift is seeking a strategic Contracts Advisor for a 1-year contract within the Supply Chain organization. The role focuses on material and/or service contracting, negotiating and managing contract lifecycles to deliv
Shutdown Execution and SIMOPS Specialist
Doha, QAT
Airswift is seeking a Shutdown Execution and SIMOPS Specialist for a contract role in Qatar. The role involves developing and coordinating shutdown plans, managing SIMOPS activities, and ensuring safe and efficient execu
Engineering Lead (Structural)
Doha, QAT
Airswift is seeking an Engineering Lead (Structural) for a contract role in Qatar to lead structural engineering deliverables for offshore projects. The role requires expertise in structural analysis, design, and contrac
Fluid & Cement supervisor
Doha, QAT
Airswift is seeking a Fluid & Cement Supervisor for a major Oil & Gas Company in Qatar. The role involves supervising drilling and completion fluids and cementing operations offshore, ensuring safety and efficiency. Requ
Instrument Planner
Doha, QAT
Airswift is seeking an experienced Instrument Planner to provide maintenance planning support for onshore facilities in Qatar. The role involves developing maintenance plans, preparing scopes of work, and coordinating re
SR. CONSTRUCTION SUPERVISOR (ELECTRICAL & INSTRUMENT)
Doha, QAT
Airswift seeks a Senior Construction Supervisor for Electrical & Instrumentation works in oil & gas related industry in Doha. Requires 15+ years experience and Higher National Diploma/Graduate in Electrical or Instrument
Head of Handover & Completion
Doha, QAT
Airswift is seeking a Head of Handover & Completion for a mega-project in Doha, Qatar. The role leads data and reporting functions for handover and completion, requiring expertise in data strategy, governance, analytics,
Drilling & Well Equipment Coordinator
Doha, QAT
Airswift seeks an experienced Drilling & Well Equipment Coordinator to support Completion and Well Intervention operations in Qatar. The role involves managing equipment lifecycle, warehouse coordination, QA/QC, logistic
Intermediate Contracts Advisor
Calgary, CAN
Shutdown Execution and SIMOPS Specialist
Doha, QAT
Engineering Lead (Structural)
Doha, QAT
Fluid & Cement supervisor
Doha, QAT
Instrument Planner
Doha, QAT
SR. CONSTRUCTION SUPERVISOR (ELECTRICAL & INSTRUMENT)
Doha, QAT
Head of Handover & Completion
Doha, QAT
Drilling & Well Equipment Coordinator
Doha, QAT