Electronic Equipment Calibrations Technician- Saudi Arabia
Job Fit Check
Base Career helps you apply smarter for this job.
Key skills for this role
About the Role
Raytheon seeks an Electronic Equipment Calibration Technician to provide calibration and repair capability for electronic test measurement and diagnostic equipment. The role requires a strong background in digital electronics and RF/Microwave, with at least 4 years of calibration experience.
Key Skills for This Role
Responsibilities
- Provides calibration and repair capability in support of all electronic test measurement and diagnostic equipment that are covered under the currently approved TAA.
- Provides training to laboratory and site personnel on new equipment, as required.
- Calibrates and/or repairs all electronic test measurement and diagnostic equipment supported by the calibration laboratory that are covered under the currently approved TAA.
- Helps to develop new procedures and methods of performing calibration on new equipment utilizing the numerous standards available in the calibration facility.
- Performs precision calibration of state of the art electronic equipment as required.
- Develops test jigs, fixtures and special test setups for calibration of newly acquired or special purpose equipment when required.
- Provides on the job training (OJT) for technicians in electronic theory, the use of electronic standards and their application to equipment calibration.
- Required to make site visits for training, evaluation and technical assistance as needed.
- Assists the section officer in enforcing safety policies, procedures, and standards.
- Performs other related duties as required or directed by the section officer.
Requirements
- Must have a strong background in digital electronics and RF/Microwave
- Must have a minimum of 4 years experience in calibration of electronic equipment
- Must have a deep understanding of the principles and concepts related to measurement, calibration, and instrumentation
- Must be meticulous in their work, as minor discrepancies in measurements can have significant consequences, and carefully follow established procedures, document their work, and ensure that all measurements are accurate and reliable
- Must be proficient in using computers and various software applications related to their work
- The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
- Bachelor’s Degree with 4 years of related experience, or Associates Degree with 8 years’ experience or HS Diploma/GED with 12 years of related experience.
Full Job Posting
Job Overview
- At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and st
What You Will Do
- The Electronic Equipment Calibration Technician provides calibration and repair capability in support of all electronic test measurement and diagnostic equipment that are covered under the currently approved TAA.
- Provides training to laboratory and site personnel on new equipment, as required.
- Calibrates and/or repairs all electronic test measurement and diagnostic equipment supported by the calibration laboratory that are covered under the currently approved TAA.
- Helps to develop new procedures and methods of performing calibration on new equipment utilizing the numerous standards available in the calibration facility.
- Performs precision calibration of state of the art electronic equipment as required.
- Develops test jigs, fixtures and special test setups for calibration of newly acquired or special purpose equipment when required.
- Provides on the job training (OJT) for technicians in electronic theory, the use of electronic standards and their application to equipment calibration.
- Required to make site visits for training, evaluation and technical assistance as needed.
- Assists the section officer in enforcing safety policies, procedures, and standards.
- Performs other related duties as required or directed by the section officer.
Qualifications You Must Have
- Must have a strong background in digital electronics and RF / Microwave
- Must have a minimum of 4 years experience in calibration of electronic equipment
- Must have a deep understanding of the principles and concepts related to measurement, calibration, and instrumentation
- Must be meticulous in their work, as minor discrepancies in measurements can have significant consequences, and carefully follow established procedures, document their work, and ensure that all measurements are accurate and reliable
- Must be proficient in using computers and various software applications related to their work
- The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer
- Familiar with various types of measuring equipment and understand their operation, maintenance, and calibration requirements
- A strong foundation in mathematics, as they must perform calculations and interpret numerical data to ensure the accuracy of measurements and calibrations
Required Education
- Bachelor’s Degree with 4 years of related experience, or Associates Degree with 8 years’ experience or HS Diploma/GED with 12 years of related experience.
What We Offer
- Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we of
Additional Information
- Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products
- The salary range for this role is 86,800 USD 165,200 USD.
Apply for this job in 1 click
Skip the repetitive application forms
Install the Base Career Chrome Extension and autofill job applications across major job boards with your profile.
Trusted by over 500,000 job seekers on Base Career
More from this employer
More jobs at Raytheon
Senior Software Engineer - Core Systems & Libraries (Onsite)
Riyadh, KSA
Collins Aerospace is hiring a Senior Software Engineer to architect and develop core software components for avionics platforms. The role involves full lifecycle development with C++, DO-178 certification, and collaborat
Principal Systems Engineer, Digital Radar Onsite
Riyadh, KSA
Raytheon is seeking a Principal Systems Engineer to support Digital Radar test activities in Huntsville, AL. The role involves radar performance analysis, flight test support, and verification strategies. Requires a STEM
Senior Principal Radar Systems Engineer
Riyadh, KSA
Raytheon is seeking a Senior Principal Radar Systems Engineer to lead architecture and requirements development for Missile Defense System radar M&S capabilities. The role requires a STEM degree and 10+ years of experien
Senior Systems Engineer, Digital Radar Onsite
Riyadh, KSA
Raytheon seeks a Senior Systems Engineer to support Digital Radar test activities, including radar performance analysis and flight test pre/post mission activities. The role involves planning and executing radar test eve
Manager, Product Definition- Compressor
Mississauga, CAN
Pratt & Whitney Canada is seeking a Manager, Product Definition for the Compressor module to lead a team of technologists/analysts responsible for engineering product definition deliverables. You will manage program task
Manager, Product Definition- ECN
Mississauga, CAN
Pratt & Whitney Canada is looking for an experienced technical leader to supervise a group of technologists/analysts responsible for product definition deliverables for the Externals, Controls and Nacelles (ECN) module.
Manager, Product Definition- ECN
Mississauga, CAN
Pratt & Whitney Canada is looking for an experienced technical leader to supervise a group of technologists/analysts responsible for product definition deliverables (3D CAD, Drawings, Tolerance Stack-ups, Change Orders)
Manager, Product Definition- ECN
Mississauga, CAN
Pratt & Whitney Canada is seeking a Manager, Product Definition for the Externals, Controls and Nacelles (ECN) module to lead a team of technologists/analysts in preparing and managing engineering product definition deli
Senior Software Engineer - Core Systems & Libraries (Onsite)
Riyadh, KSA
Principal Systems Engineer, Digital Radar Onsite
Riyadh, KSA
Senior Principal Radar Systems Engineer
Riyadh, KSA
Senior Systems Engineer, Digital Radar Onsite
Riyadh, KSA
Manager, Product Definition- Compressor
Mississauga, CAN
Manager, Product Definition- ECN
Mississauga, CAN
Manager, Product Definition- ECN
Mississauga, CAN
Manager, Product Definition- ECN
Mississauga, CAN