Senior Process Engineer – 6 months Contract only
Job Fit Check
Base Career helps you apply smarter for this job.
Key skills for this role
About the Role
OilExec International seeks a Senior Process Engineer for a 6-month contract in Doha to act as the highest technical authority on process engineering for FEED/EPC projects. The role involves reviewing designs, supervising contractors, and ensuring compliance with standards.
Key Skills for This Role
Responsibilities
- Act as the main focal point and highest technical authority on Process related activities for FEED/EPC scope development
- Review and provide input to FEED scope of work; review Process discipline deliverables and supervise the engineering/construction/EPC contractor’s work for all modification and engineering activities including P&ID development, PFD, Line list, Design basis, material balance, process datasheets, Instrument datasheets, Safety valves, C&E charts, control system description and calculation notes
- Carry out feasibility studies and prepare and review related to the project; set parameters for simulations, review and approve red lined mark ups of PFDs, PIDs, data sheets and other relevant deliverables
- Supervise the FEED/engineering/construction/EPC contractor(s)’ work for all related to assigned project drawings review/approval during engineering related projects, ensuring compliance with HSE&S standards and international codes/standards
- Interface with contractors’ engineering teams and provide technical guidance and expertise to ensure project requirements are clearly understood and met; review and approve related technical documents
- Prepare and review data sheets/specifications, P&ID, study reports, vendor screening/selections, and technical bid evaluations, and approve or make recommendations to management
- Review vendors/subcontractor(s) drawings, calculations, and related documentation to ensure Process and/or valve engineering aspects meet required specifications
- Participate in main/critical materials’ Factory Acceptance Testing (FAT) and provide installation and commissioning guidance as required
- Coordinate with company quality control, Asset Integrity, Projects and Operations teams to provide specialist engineering support
- Participate in costing and preparation of budgets for piping and valve/engineering or related projects; support to prepare business case studies and techno economic justifications
- Participate in design reviews, 3D model reviews, technical studies, PID reviews, constructability reviews and PHAs (Process hazard analysis like Hazop, What if, Hazid etc.)
- Review technical content of Non Conformance Requests (NCRs), warranty claims, derogation requests and concession requests and provide recommendations
Requirements
- Bachelor’s Degree in Chemical Engineering
- 15 years’ relevant experience in process engineering within the oil and gas industry or related engineering consultants/EPC contractors
- Minimum of 5 years at senior level
- Minimum of 15 years’ experience in process engineering for similar oil/gas production and upstream/downstream processing facilities
- Minimum of 8 years’ experience in Oil & gas industry as subject matter expert (for detailed analysis and report approvals)
- Minimum of 8 years’ experience in gas processing related Projects
- Skilled in computer MS Office/MS projects & Presentation
- Proficiency in International Codes like API, TEMA ASTM, NACE
- Additional related technical qualifications (PRO II, PIPESIM, HTRI etc) and Certifications would be an added asset
Full Job Posting
Functional Overview
- Job holder acts as the Expert/Highest technical authority in the area of Process Engineering including line hydraulics, surge analysis and Pump hydraulics.
- Handle Engineering for the Project long term FEED, PLANNING and EPC (Detailed engineering, Procurement, Construction, Pre Commissioning).
Responsibilities
- Act as the main focal point and highest technical authority on Process related activities for FEED/EPC scope development. Be a major contributor on fit for purpose concept process engineering definitions, to enable screening and selection.
- Review and provide input to FEED scope of work. Review Process discipline deliverables and supervise the engineering / construction / EPC contractor’s work for all modification and engineering activities including P&ID development, PFD, Line list, Design basis, material balance, process datasheets,
- Carry out feasibility studies and prepare and review related to the project. This includes setting parameters for simulations, reviewing and approving red lined mark ups of PFDs, PIDs, data sheets and other relevant deliverables for all modifications from engineering / construction / EPC contractors
- Supervise the FEED/engineering/construction/EPC contractor(s)’ work for all related to assigned project drawings review / approval during engineering related projects, ensuring compliance with HSE&S standards and international codes/standards in alignment with company policies and strategies.
- Interface with contractors’ engineering teams and provide technical guidance and expertise to ensure project requirements are clearly understood and met. Review and approve related technical documents.
- Prepare and review data sheets/specifications, P&ID, study reports, vendor screening/selections, and technical bid evaluations, and approve or make recommendations to management for approval, as per the Document Distribution Matrix (DDM).
- Review vendors/subcontractor(s) drawings, calculations, and related documentation to ensure the Process and/or valve engineering aspects meet the required specifications. Comment on and/or approve the relevant documents and follow up with engineering contractors to ensure the comments are incorporat
- Participate in main/critical materials’ Factory Acceptance Testing (FAT) and provide installation and commissioning guidance as required.
- Coordinate with company quality control, Asset Integrity, Projects and Operations teams to provide specialist engineering support in the project.
- Participate in costing and preparation of budgets for piping and valve/engineering or related projects. Support to prepare business case studies and techno economic justifications for high value modification projects.
- Participate in design reviews, 3D model reviews, technical studies, PID reviews, constructability reviews and PHAs (Process hazard analysis like Hazop, What if, Hazid etc.).
- Review technical content of Non Conformance Requests (NCRs), warranty claims, derogation requests and concession requests received from the engineering/EPC/construction contractors and vendors, and provide recommendations for acceptance, acceptance with comments, or rejection of same for management
Qualifications & Experience
- Minimum Educational Requirements / Qualifications: Bachelor’s Degree in Chemical Engineering.
- Minimum Experience: 15 years’ relevant experience in process engineering within the oil and gas industry or related engineering consultants/EPC contractors.
- Skills and Competencies: Bachelor’s degree (4/5yrs) in Chemical Engineering.
- Additional related technical qualifications (PRO II, PIPESIM, HTRI etc) and Certifications would be an added asset / preferable.
- Minimum of 15 years’ experience in process engineering for major projects, with at least 5 years at senior level.
- Minimum of 15 years’ experience in process engineering for similar oil/gas production and upstream/downstream processing facilities.
- Minimum of 8 years’ experience in Oil & gas industry as subject matter expert (for detailed analysis and report approvals).
- Minimum of 8 years’ experience in gas processing related Projects.
- Skilled in computer MS Office/MS projects & Presentation.
- Proficiency in International Codes like API, TEMA ASTM, NACE.
Apply for this job in 1 click
Skip the repetitive application forms
Install the Base Career Chrome Extension and autofill job applications across major job boards with your profile.
Trusted by over 500,000 job seekers on Base Career
More from this employer
More jobs at OilExec International
HSE MANAGER – Local Hire Contract Basis
Doha, QAT
OilExec International is hiring an HSE Manager on a local hire contract basis in Doha. The role requires a minimum of 10 years of experience as an HSE Manager, with qualifications including NEBOSH IGC, ISO 45001, OSHA, a
Engineering Manager- RasLaffan
Doha, QAT
OilExec International is seeking an Engineering Manager for a role in Ras Laffan, Qatar. You will lead project development from concept to handover, ensuring compliance with Dolphin Energy standards. Requires a Bachelor'
Engineering Manager Location : Doha / Ras Laffan
Doha, QAT
OilExec International is seeking an Engineering Manager for a role in Doha/Ras Laffan, Qatar. You will plan, manage, and lead project development from conception to handover, ensuring alignment with best practices and st
Sr. Planning /Cost Engineer-Doha / Ras Laffan
Doha, QAT
OilExec International seeks a Senior Planning/Cost Engineer for projects in Doha and Ras Laffan. The role involves expert project planning, scheduling, cost control, and budget management for technical services in the en
Urgent openings for Material Engineer- Technical Evaluation (Electrical)
Doha, QAT
OilExec International seeks a Material Engineer for technical evaluation of electrical spares in Doha. Requires 10+ years experience in plant maintenance or technical evaluation, with 6+ years in oil and gas. Bachelor's
Urgent openings for Material Engineer- Technical Evaluation ( Mechanical)
Doha, QAT
OilExec International seeks a Material Engineer for technical evaluation of mechanical spares in Doha. Requires 10+ years experience in plant maintenance or technical evaluation, with 6+ years in oil and gas. Bachelor's
Public Relations Specialist
Doha, QAT
OilExec International is seeking a Public Relations Specialist with 8+ years of experience in major infrastructure projects in Doha. The role requires a Bachelor's degree in mass communication/media/management, a driver'
7. OFFSHORE HVAC TECHNICIAN
Doha, QAT
OilExec International seeks an Offshore HVAC Technician in Doha to perform maintenance and repair on HVAC equipment in offshore facilities. Requires minimum 5 years oil and gas experience and HVAC certification.
HSE MANAGER – Local Hire Contract Basis
Doha, QAT
Engineering Manager- RasLaffan
Doha, QAT
Engineering Manager Location : Doha / Ras Laffan
Doha, QAT
Sr. Planning /Cost Engineer-Doha / Ras Laffan
Doha, QAT
Urgent openings for Material Engineer- Technical Evaluation (Electrical)
Doha, QAT
Urgent openings for Material Engineer- Technical Evaluation ( Mechanical)
Doha, QAT
Public Relations Specialist
Doha, QAT
7. OFFSHORE HVAC TECHNICIAN
Doha, QAT