Maintenance Tech I

UNIVERSAL CORE COMPETENCIES

Position Duties

• Regular and consistent attendance at work. Exact shift hours will be determined by Sr. Director of Maintenance & Automation . Operate, repair and perform preventative maintenance on boilers, chillers, air handlers and other electro-mechanical devises. Troubleshoot, repair and calibrate electric, electronic and pneumatic circuits, controls and controlled devices using testing equipment such as volt ohmmeter, amp meter, flowmeter, pressure gauges, voltmeters, etc. Perform general maintenance duties such as, but not limited to: repairing electrical malfunctions and installing new equipment; assembling, installing, and repairing pipes, fittings, and fixtures of heating, water, and sewer systems. Perform general construction duties such as electrical, plumbing, general construction. Conduct routine preventative maintenance duties. Conduct routine life safety inspections and maintenance. Operate any of the following types of equipment: workshop tools, tractors, skid loaders, dump truck, trailers, back hoe, end loader, lifts, pallet forks, and other related equipment. Must maintain compliance with required trainings as designated by supervisor. Monitoring of building HVAC controls Climb and balance on ladders, stairs, scaffolding, ramps, poles, etc. up to 25 feet to perform work assignments as required. Collaborate when needed with co-workers to complete assignments. Maintain and submit written or oral reports. In addition this position requires frequent computerized maintenance management system (CMMS) utilization. Operate equipment such as plows, snow blowers, salt/sand spreaders, as well as shovels in the winter months to remove snow and ice from roads, parking lots and walkways. Perform assigned task as a member of the Emergency Response and Control Team. Perform other duties as may be assigned. Shift differential- Additional $2.00 per hour of compensation is provided for hours worked between 6:00pm-6:00am. PERFORMANCE EXPECTATIONS: Be able and willing to always represent the College in the most positive manner with prospective, former and current students, clients, suppliers and the community we serve. Safely perform scheduled maintenance. Establish and maintain good working relationships with coworkers and supervisory personnel. Be willing and able to provide proper customer service to students, faculty and staff at Kirkwood. Working knowledge of electrical, carpentry, plumbing, and other crafts. Be able to perform all job duties in a group setting or while working alone. Willing to work a flexible schedule on nights and weekends as needed Knowledge of the occupational hazards and safety precautions in the job involved. Understand and follow oral and written instructions. Learn the computer system that controls both the heating and cooling of all campus buildings Welcome, value, and nurture people of all backgrounds, perspectives, and experiences, as well as support and promote an environment that accepts differences. The statements contained herein reflect general details as necessary to describe the essential job duties/responsibilities and performance expectations of the job, which should not be considered an all-inclusive listing of work requirements. Individuals may perform other duties as assigned.
• Regular and consistent attendance at work. Exact shift hours will be determined by Sr. Director of Maintenance & Automation .
• Operate, repair and perform preventative maintenance on boilers, chillers, air handlers and other electro-mechanical devises.
• Troubleshoot, repair and calibrate electric, electronic and pneumatic circuits, controls and controlled devices using testing equipment such as volt ohmmeter, amp meter, flowmeter, pressure gauges, voltmeters, etc.
• Perform general maintenance duties such as, but not limited to: repairing electrical malfunctions and installing new equipment; assembling, installing, and repairing pipes, fittings, and fixtures of heating, water, and sewer systems.
• Perform general construction duties such as electrical, plumbing, general construction.
• Conduct routine preventative maintenance duties.
• Conduct routine life safety inspections and maintenance.
• Operate any of the following types of equipment: workshop tools, tractors, skid loaders, dump truck, trailers, back hoe, end loader, lifts, pallet forks, and other related equipment.
• Must maintain compliance with required trainings as designated by supervisor.
• Monitoring of building HVAC controls
• Climb and balance on ladders, stairs, scaffolding, ramps, poles, etc. up to 25 feet to perform work assignments as required.
• Collaborate when needed with co-workers to complete assignments.
• Maintain and submit written or oral reports. In addition this position requires frequent computerized maintenance management system (CMMS) utilization.
• Operate equipment such as plows, snow blowers, salt/sand spreaders, as well as shovels in the winter months to remove snow and ice from roads, parking lots and walkways.
• Perform assigned task as a member of the Emergency Response and Control Team.
• Perform other duties as may be assigned.
• Shift differential- Additional $2.00 per hour of compensation is provided for hours worked between 6:00pm-6:00am.

PERFORMANCE EXPECTATIONS

Minimum Qualifications

• Light to medium work. Position involves exerting up to 50 pounds of force occasionally (10-33%); up to 20 pounds frequently (34-66%); and up to 10 pounds constantly (67-100%) to move objects. Physically able to perform constant (67-100%) and routine stooping, bending, reaching, standing, walking, pushing, pulling, lifting and grasping. Occasional (10-33%) crawling and kneeling. Potentially subject to bio-hazardous waste; chemical waste; moving mechanical parts; electrical current; working on scaffolding, lifts and high places up to 25 feet; atmospheric conditions that may affect the respiratory system or the skin; fumes, odors, dusts, mists, gases or poor ventilation; noise; and vibration; and inside and outside environmental conditions. Person in this position must satisfactorily complete Kirkwood's Blood Borne Pathogens training because of the potential exposure risk to blood or body fluids. Must satisfactorily complete Kirkwood's CPR/First Aid training and Right-to-Know program as a member of the Emergency Response and Control Team.
• Light to medium work. Position involves exerting up to 50 pounds of force occasionally (10-33%); up to 20 pounds frequently (34-66%); and up to 10 pounds constantly (67-100%) to move objects. Physically able to perform constant (67-100%) and routine stooping, bending, reaching, standing, walking, pushing, pulling, lifting and grasping. Occasional (10-33%) crawling and kneeling.
• Potentially subject to bio-hazardous waste; chemical waste; moving mechanical parts; electrical current; working on scaffolding, lifts and high places up to 25 feet; atmospheric conditions that may affect the respiratory system or the skin; fumes, odors, dusts, mists, gases or poor ventilation; noise; and vibration; and inside and outside environmental conditions.
• Person in this position must satisfactorily complete Kirkwood's Blood Borne Pathogens training because of the potential exposure risk to blood or body fluids. Must satisfactorily complete Kirkwood's CPR/First Aid training and Right-to-Know program as a member of the Emergency Response and Control Team.

Other Qualifications

• High school diploma or equivalent required. 1-3 years of building maintenance experience. Knowledge of Facilities HVAC, Electrical and Plumbing systems. Ability to work under physical/environmental demands. Valid driver’s license required. PREFERRED QUALIFICATIONS, LICENSES, CERTIFICATIONS, OR REGISTRATIONS : Associates degree preferred. 3-5 years of building maintenance experience HVAC, Plumber or Electrical Licenses Direct maintenance experience with-in an educational setting Work-order system (CMMS) experience EEO AA/STATEMENT: It is the policy of Kirkwood Community College not to discriminate in its programs, activities, or employment on the basis of race, color, national origin, sex, disability, age, sexual orientation, gender identity, creed, religion, and actual or potential family, parental or marital status. If you have questions or complaints related to compliance with this policy, please contact the Vice President, Human Resources and Institutional Effectiveness (employees) or the Vice President of Student Services (students), 6301 Kirkwood Blvd. SW, Cedar Rapids, IA 52404, 319-398-5572, equity@kirkwood.edu , or the Director of the Office for Civil Rights, U.S. Department of Education, Cesar E. Chavez Memorial Building, 1244 Speer Boulevard, Suite 310, Denver, CO 80204-3582, Telephone: (303) 844-5695 FAX: (303) 844-4303, TDD 800-877-8339 Email: OCR.Denver@ed.gov . WHY KIRKWOOD: Kirkwood Community College prides itself on fostering a diverse workforce and values unique perspectives throughout its campus community. The college is a convenient, innovative, visionary educational leader striving to remain affordable and accessible. With more than 140 majors and programs, Kirkwood boasts 16,000 annual college-credit students while maintaining one of the lowest tuitions in the state. All degree-seeking students are eligible for federal financial aid and the college offers more than $3 million in scholarships each year to students from all walks of life. Review of applications will continue until the position is filled.
• High school diploma or equivalent required.
• 1-3 years of building maintenance experience.
• Knowledge of Facilities HVAC, Electrical and Plumbing systems.
• Ability to work under physical/environmental demands.
• Valid driver’s license required.
• PREFERRED QUALIFICATIONS, LICENSES, CERTIFICATIONS, OR REGISTRATIONS :
• Associates degree preferred.
• 3-5 years of building maintenance experience
• HVAC, Plumber or Electrical Licenses
• Direct maintenance experience with-in an educational setting
• Work-order system (CMMS) experience

EEO AA/STATEMENT